The PC-Strand product range is used primarily for prefabricated concrete elements, hollow core slabs, beams, TT-slabs or railway sleepers and in post tensioning constructions such as bridges, silos or off-shore applications.
Our Low Relaxation PC-Strand product range consists of 3- and 7-wire strands made from high-quality wire rod in various steel grades, depending on the application.
AII PC-Strands are available with either plain or indented surface. The standard tensile strengths are 1770 MPa and 1860 MPa. Our 3-wire strand wires are of uniform thickness. In our 7-strands, the core wire diameter is at least 3 % greater than that of the outer helical wires.
The standard geometric and mechanical properties of each coil are tested in our own laboratory in accordance with the EN ISO 15630-3 standard. FNsteel is also constantly monitored by the relevant standards authorities, ensuring that product standards are fully met.
Our PC-Strands are delivered in precision-wound coils and have excellent pay-off properties. The standard coil weight for 3-wire strands is 1.4 or 2 tonnes, and 3, 4 and 5 tonnes for 7-wire strands coils. Bespoke coils can also be manufactured to customer specifications. The PC-Strands are also available with protective wrapping.
| || || |
2B jänneteräs 18
7-wire PC-strand by
BY for Finland
7-wire PC strand
by CARES for
UK and Ireland
7-wire PC strand
The information contained in this data sheet is provided without warranty by FNsteel in regard to its accuracy or the suitability of products for particular uses While FNsteel believes that it has observed due care in compiling the information, the information is furnished "as is". FNsteel recommends readers of the data sheet not to rely upon the information without separate written confirmation from FNsteel, and FNsteel therefore excludes any liability, including for negligence and other allegedly tortuous conduct, based upon the information set forth.